Skip to product information
1 of 6

OBDLAUNCH

WOYO PL011 PKE LF Locator Transponder Key Coil Detector ,Test Automotive Keyless Entry LF HF Antenna Inspection Tool

WOYO PL011 PKE LF Locator Transponder Key Coil Detector ,Test Automotive Keyless Entry LF HF Antenna Inspection Tool

Regular price $42.87
Regular price $0.00 Sale price $42.87
Sale Sold out
Shipping calculated at checkout.

2024 WOYO PL011 PKE LF Locator Original Brand New

PKE PEPS with One-Key Start Immobiliser System Transponder Key Coil Tester

Detect Automotive Low Frequency LF Antenna Diagnostic tool

Easy to Test Automotive HF/LF Antenna

Supply of automotive ECU detection coil.

It applies to all cars tested with "Engine Start Stop" One-Key Start Button.

1. When your car key remote run out of the battery, don't worry, use PL011 find the Transponder coil in your car, place the car key over there, press the "Engine Start Stop" Button, congratulation, the car has been started!

 

2.How to check if the transponder coil has been broken?

 

If the car key remote works normally when detected by the WOYO PL001 frequency tester and cannot start the vehicle,, Let the PL011 close to Induction Transponder coil, press the "Engine Start Stop" Button, if no beeps sound and no flashing red light, it means the coil has been broken. Super Fast testing, even 3s.

 

3.When you want to clone and program the car key, need to find where is the Low Frequency Antenna/Transponder coil in the car, you can use PL011 to find it and locat it, the distance about 5-10 cm will remind you by beeps sound, when the red LED to be full show, you can find there is a "key" mark over there. (Congratulation, you find the place!!)

 

4.Supports all models with Keyless Entry System PKE PEPS Smart Car key Remote Controller ransponder coil tester.

 

5. Intelligent operation, no need to connect to a computer.

 

6. At the same time, it is a powerful assistant for car electronic maintenance personnel and car locksmiths.

Notice:

When you use the PL011, you need to press the "Engine Start Stop" Button from time to time to make the transponder coil send the signal, and then the PL011 will get it when it close to it.

 

 

Description:

 

 

1. Power supply battery 1.5V*2 AAA;

 

 

2. Standby power consumption 12mA/3V;

 

 

3. The farthest detection distance: 5-10cm, 125KHz, with the strength of the signal, non-absolute value;

 

 

4. 3 minutes no detection signal automatic sleep;

 

 

5. Strong and weak indication: detect the signal, the buzzer beeps, the stronger the signal, the more indicator lights.

 

 

Switch Button:

Long Press: Turn on/off the device.

 

 

Red light display:

The red light will keep the half lighting: No signal from Low Frequency Antenna.

If you find the LF Antenna place, and use PL011 to test if it work well, now it shows you not work well.

 

Received Signal From LF Antenna: Full Red light with Beep sound.

 

 

How to Find the PKE LF Transponder Key Coil in the car?

 

Note: Test after confirm the PKE LF Transponder Key Coil works normal.

 

1. Buy and install 2 pieces of 1.5V AAA power battery into PL011.

2. Long press the ON/OFF button to turn on the device, you can here Beep sound and display half of red light.

3. Move the PL011 in the Car Instrument Panel (Front Parts), in the same time, press the "Engnie Start Stop"button from time to time, Look for the PKE LF Transponder coil untill the PL011 sound Beep.

4. When you hear a beeping sound from the device, it means that the coil is within 10 cm ;

5. the closer you get to the coil, the more frequently the beeping sounds, and the indicator on the device flashes the full red light.

 

 

When you know the place of the transponder key coil, how to test if it work well?

 

1. Find "Key"mark on your car, the coil is over there.

2. Long press ON/OFF button to turn on the PL011 ,Place PL011 close to the "Key"mark.

3. Press "Engine Start Stop"button to make coil send signal to test.

If LF Coil Work well: PL011 show Full Red LED + Beep Sounds

If LF Coil Broken: No sound , nothing change on PL011.

 

 

 

When your car key run out of battery, how to start the engine?

 

1. Find the Transponder Coil in your car.

2. Place the car key remote close to it.

3.Press "ENGINE Start Stop" button to Start the car.

 

 

Package :

Since the logistics rejects all items with batteries, so we couldn't send with the battery, please know.


 

 

 

View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)