obdlaunch
VT01387 Bearing Extractor Kit Blind Holes Inner Puller
VT01387 Bearing Extractor Kit Blind Holes Inner Puller
.One slide hamer assemble 2.5 jaws.
.For removal of pilot bushes etc.
.Form blind housings.
Include:
.10- Collects (segment grip type):
8 -11mm, 12-17mm, 18-23mm,
24-29mm, 30-34mm, 34-38mm,
39-43mm, 44-48mm, 49-53mm,
54-58mm
.3- Screw Adapters: M10x1.5p, M10x1.5P / M8x1.25p, M10x1.5p / M6x1.0p
.1- Sliding Hammer
.1- Puller
Direction:
Remove with a slide hammer
1.Insert a suitable-sized stud into the blind hole.
2.Connect the stud to the slide hammer, and make sure they are securely connected.
3.Slide the weight on the hammer until the bearing comes out from the blind hole.
Remove with a claw puller
1.Insert a suitable-sized stud into the blind hole.
2.Connect the stud to the claw puller, and make sure they are securely connected.
3.Use a spanner to fasten the stud on the claw puller until the bearing comes out from the blind hole.