2021 XTOOL D8 OBD2 Diagnostic Scanner ECU Coding Automotive OBD Code Reader all systems diagnotic tools Support CAN FD

 

2021 Newest XTOOL D8 OBD2 Diagnostic Scanner Automotive OBD Code Reader Professional Car Scan Tool 8 inch Scanner Support CAN FD

 

1. 8 Inch Scanner and Newest Tablet with the best Operating system and screen

 

2. Full systems diagnostic functions including the engineer,airbag. ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS etc

 

3. More than 30+ Special Functions like Oil Reset, EPB, BMS, SAS, DPF, TPMS, and IMMO Service etc

 

4. Actuation Test (Bi-directional control)+ECU Coding

 

5. Support more than 1000+ Car models and keep Online update

 

6. 24 hours Technical Support and Weekly New Car models Update

 

7. Works for all OBD2 functions for Read Codes/Erase Codes/Live Data

 

8. D8 Support Can FD for GM/Chevrolet For GMC Buick Cadillac Old models

 

9. Remote Support for Online helping

 

 

 

All Systems Diagnostic(Few minuites Read all systems)

 

To diagnose car comprehensively, XTOOL D8 scanner can read DTCs and data streams, perform active test, Coding for ALL systems.

For instance: Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics, ....etc.

 

 

 

XTOOL D8 with More than 20 Kinds of Special Functions (keep update)

 

1.Oil ResetClose the oil service light and reset service mileage & service interval after replacing the engine oil.

2.Electroniac Parking Brake ResetReset the new electronic parking brake for braking wheels safely again.

3.Throttle Relearn: Allows to reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

4.Tire Pressure Monitor System Reset:Relearn TPMS sensors so that new sensors can be recognized by ECU.

5.ABS Bleeding:Get a firm brake pad after air exhaustion.

6.Immobilizer: Allows to disable a lost vehicle key to protect the vehicle from being stolen and add the new key.

7.DPF Regeneration: Allows to clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

8.Injector Coding: Allows to write a new code to the ECU for accurate communication and Injection control. After the ECU or injector is replaced, the cylinder can better identify injectors to accurately control fuel injection.

9.SAS Adjustment: Allow to clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.

10.BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.

11.DIY Mode:Programmer Car models Hidden functions (High configuration hidden function) And Windows Calibration, Seats Calibration,
12.Tire Reset, Language Change,A/F Reset,Coolant Bleed,Transport Mode,NOx Sensor Reset ect

 

.....More

 

 

 

AUTO VIN SCAN

1.Auto VIN Scan
: The XTOOL D8 diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.

2.Manual VIN Input:
For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.

3.Automatic Selection:
The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.

4.Manual Selection:
When the vehicle's VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.

 

 

 

ECU Coding

 

Match, learn, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions;Reprograms the adaptive data for certain components after repairs or replacements

ECU CODING allows you to match the ECUs with replaced components, flash hidden functions, for BMW, VW, Porsche, etc.

 

 

Active Test ( BI-Directional Controls)

 

XTOOL Newest D8 automotive scanner can actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls. It can read/erase codes, view live data, retrieve ECU info, do active test and service functions for all systems including ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and A/C system etc.

 

 

 

Maintenance HelpIncluding How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.

Diagnostic HistoryOnce a vehicle diagnosis is performed, XTOOL D8 will record the every detail of the diagnostic process.you can record/review ayback live data anytime .The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch

Diagnostic Feedbackallows you to submit any issues you cant immediately fix. With the support of professional experts, XTOOL will make great efforts to provide you with the best solutions as soon as possible.

 

Remote diagnoseOn Tablet have the Quick-help engineer can enter your tablet and help you make diagnostic and provide professional technical support
 

 

XTOOL D8 Parameters

 

 

Operating Systems Android 5.0

Storage2GRAM. 64G ROM

ProcessorQuad care processor 1.8GHz

Camera8.0Megapixel,Auto Focus rear camera with flash

Sensor:Sensor gravity sensing

Audio input: Microphone

Audio output: Speaker

Interface: USB 3.0 DC Charging port ,VAG interface

Battery: 10000mAh,3.7V lithium polymer battery

Input voltage 12V

woorking Temp :-10-50 Celsius

Relative humidity <90%

Tablet Size:274X175X33.8(MM)

 

 

PS:In order to better protect the battery ,it is recommend to charge the diagnostic equipment at the ambient temperature of 0-40 Celsius