WOYO For BMW R1200GS R1200RT R1250GS F650 F750 F850 F900 Motorcycle light Control with lamp, Dim Light by Original Buttons

We have Bluetooth 5.0 Android Cellphone Diagnostic scanner for all BMW bike

Easy to reset the service reminder

Click the picture enter the link:

WOYO Motorcycle Light Controller

CAN bus electrical system controller

Plug & Play Accessory Manager for BMW Motorcycle Spotlights

Control the Increased LED by original switches

Only suit for motorcycle year of 2017/2018/2019/2020/2021/2022/2023

Note: This link's controller is new, we will modify and program it after you place an order,

So, please send us your motorcycle with year after your purchasing.

If you find the model write "MLC001/MLC002/MLC003/MLC004/MLC005/MLC006"

is normal and correct.

Description:

1.Based on the motorcycle's CAN bus control system, utilize the original motorcycle switches to control new additional spotlights. Buttons such as scroll wheel, horn, high beam, etc. can adjust the brightness and burst mode of the spotlights.

2. The lights will not operate when the motorcycle is not running.

3. Plug-and-play design for easy installation.

4. Fashion DIY with different spotlight from your other Motorcycle people.

    Note: Depend on the type of spotlight and the connection method,

    please chat with our after-sales customer service before installation.

Note:

1. The total load power of the module cannot exceed 260W.

2. DWA & RDC Module Connect to the same position.

WOYO NEW Plug and Play controller with lamp

Dimensions: 3.6inches (6 lights inside)
Voltage: DC 12V
Color Temperature: 6000K
Lumen: 24000lms
Material: aviation aluminum
Rated power: 60W/pc
Service life: about 50,000 hours
Use environment: Rain, Heavy snow, Foggy

 

 

Use your motorcycle Original button to controller the light.

 

 

 

"1 Pair" = 2pcs lamp + controller + 2pcs extension cable

"2 Pair" = 4pcs lamp + controller + 4pcs extension cable

Any question, please feel free to contact us.

2023 WOYO MLC Module for BMW R1200 R1250 F650 F750 F800 F850 F900

Plug and Play Accessory Manager, Easy to install, DIY the spotlights you like

 Control the increased brightness of spotlight by original switches of the motorcycle

Description:

1.Based on the motorcycle's CAN bus control system, utilize the original motorcycle switches to control new additional spotlights. Buttons such as scroll wheel, turn signal, horn, high beam, etc. can adjust the brightness and burst mode of the spotlights.

2. The lights will not operate when the motorcycle is not running.

3. Equipped with two adjustable lighting circuits: Main light*1, Auxiliary light*1.

    Plug-and-play design for easy installation.

4. Fashion DIY from your other Motorcycle people.

Note:

1. The total load power of the module cannot exceed 260W.

2. DWA & RDC Module Connect to the same position.

 

 

 

 

 

Our conntroller doesn't support brake lamp,

support 2 sets spotlights (in total 4 lights).

Cable Module:

1.Power Supply 12V Fuse 30A (Red-Positive Black-Negative)

2.CAN BUS Red/Black/Blue/Green (Male / Female 4P)

3.Lighting circuit No.1 Blue/white/black (3P) 90W *1

4.Lighting circuit No.2 Green/White/Black (3P) 150W *1

Lighting NO.1:

Blue---Spotlight Postive

White--- PWM Adjust Brightness Wire

Black---Spotlight Negative

 Lighting NO.2:

 Blue---Spotlight Postive

 White--- PWM Adjust Brightness Wire

 Black---Spotlight Negative

 

 

It support Auxiliary lights or Fog lights, not support Brake lights.

 

How to use MLC module connect to your motorcycle and light?

 

Function for BMW spotlights Intelligent Management Module:

 

1. Turn on the ignition lock- ----Start the spotlights module

2. Power up--- the spotlights self-test

3. Press the ignition switch ---Start the car

4. Long press the turn signal reset button for 2s---- Turn on the first set of spotlights.

5. Press the turn signal reset button 3 times within 2s---Turn on the second set of spotlights.

6. Roll the wheel forward ---- increase the spotlights brightness

7. Roll the wheel backward ----decrease the spotlights brightness

8. Push the wheel to the right way one time--- Enter left-right alternating flashing mode 1

9. Push the wheel to the right way again ---- Enter flash mode 2

10. Push it again, return to the constant light mode.

11. Press the horn ---- Synchronize the spotlights flash

12. Press the high beam button once --- synchronize the spotlights instant high brightness

13. Keep the high beam button on --- keep the spotlights synchronized high brightness

14.  Long press the turn signal reset button for 2s---- Close the spotlights.

 

 

Support Motorcycle/ Bike Model for BMW list:

MLC011 (RDC Plug)

For BMW R-Series Module:

R1250R, R1250RS, R1250RT, R1250GS, R1250GSAdv

MLC012 (RDC Plug)

For BMW R-Series Module:

R1200R, R1200RS, R1200RT, R1200GS, R1200GSAdv

MLC013 (DWA Plug)

For BMW F-Series Module:

F750GS-K80, F650(2 CYL.) -K72, F800GS-K72,

F850GS-A2K81, F850GSAdv-K82, F900R-K, F900XR-K84