AUTOOL XC505 3D Wheel Alignment Machine Tire Aligner System Automatic Wheel Positioner Automotive Tire Repair Tool 110V 220V

Description：

AUTOOL XC505 3D wheel alignment system is to test wheel parameters and provide reference of manufacturer specs, by compare the two set of parameters, operator can adjust the vehicle wheel parameters to reasonable range, make the vehicle wheels in good condition and avoid unreasonable tire worn.The world's largest database supports 106 car brands and more than 50,000 models. Support user-defined models to add.

AUTOOL XC505 3D Wheel Alignment Basic Operation Procedure

1. Precheck
Ask the owner for vehicle drivability problems, symptoms, and wheel alignment history, and find out vehicle information such as make, model and year, etc. Check each chassis part carefully, include dust cover, bearing, rock arm, tripod-ball, shock absorber, tie rod ball and steering mechanism, for any loose or wear. Then check to see if the tire pressure, tire treads of the left and right wheels are alike. Perform the wheel alignment checking after the initial condition is known. If the measuring values do not accord with the specifications given in the databank, the wheel alignment should be adjusted. After finishing the wheel alignment, test the vehicle to see if the abnormal conditions are eliminated. Re-adjust the wheel alignment if necessary.

2. Alignment Measurement
After precheck, can start alignment measurement.

3. Adjustment
In the alignment measurement, based on the measurement results, combined with the actual
vehicle alignment fault phenomena, with reference of the OEM specs, to make corresponding
adjustments according to the actual situation.

4 .Test Run
The vehicle shall be test derived, after alignment adjustment, to confirm if the fault phenomena are eliminated. Otherwise, shall redo the adjustment.

AUTOOL XC505 3D Wheel Alignment Features：

【 Latest 3D Measurement Technology】AUTOOL XC503 3D wheel alignment machine is equipped with an industry-leading four-wheel positioning optical system with a 5 mega industrial-grade HD lens and a camera-to- turntable distance of up to 1500mm-2800mm. There is no need to move the camera, thus avoiding bumps and allowing a much longer service life. With removable storage cabinet, it is convenient to store and not easy to lose.

【Widely Used】Measurement system for full vehicle body dimension，this tire machine supports various measurements including toe -in, camber,steering axle inclination, caster, thrustangle, track width, track width diff, wheelbase, and wheelbase diff. It supports over 100 car brands and over 50,000 models, together with the possibility for users, to add the models on their own. The software has a built-in Help System, which can quickly query the vehicle adjustment plan.

【Expert Mode】The software of wheel alignment & balancing tools adopt expert mode, which is simple, fast, and time-saving to operate. Save more than 30% time than the ordinary wheel aligner.Test data can be traced and with a printing function, the test data includes detailed parameters of the vehicle.The whole measurement process is guided by voice synchronization and intelligent LED indication.

【Short Distance of Rolling Run-out Compensation】Push the vehicle backward to a short distance of 8-12cm(3.2- 4.7inches) can collect measurement data, which can detect tires in the range of 13-23 inches. Offset compensation is performed by means of rolling, which requires no stopping and has a short and adjustable rolling distance. In addition, wheel aligner is equipped with special function detection and accident vehicle measurement system.

【High-precision Waterproof Anti-fall Target】The targets are both waterproof and drop resistant, as well as not having to be calibrated regularly, which is much easier to use and maintain.There is no need to worry about problems of cable pulling, charging,battery replacement, or signal failure. Supports multiple languages, including Chinese, English, Spanish, Russian, Arabic, Thai, Portuguese.

At the following circumstance, wheel alignment will be necessary:

AUTOOL XC505 3D series wheel alignment system is to test wheel parameters and provide reference of manufacturer specs, by compare the two set of parameters, operator can adjust the vehicle wheel parameters to reasonable range, make the vehicle wheels in good condition and avoid unreasonable tire worn.

（1） Vehicle pull to one side when release steering wheel；

（2） Uneven tire worn；

（3） Steering wheel too heavy, too light or shake when driving at high speed；

（4） After tire change, chassis parts replacement；

（5） After collision；

（6） After 3000 km’s drive of new car；

（7） At regular vehicle maintenance.

AUTOOL XC505 3D Wheel Alignment Tech Specs：

 ● Power Supply: AC 110/220V 50/60 Hz
● Computer Host : ASUS (or all in one computer)
● Monitor : 18. 5 inch color monitor (all in one computer comes with 23 inch monitor)
● Toe-in : 0~+_20 degree
● Camber : 0~+_8 degree
● SAI/Kingpin : 0~+_20 degree
● Caster : 0~+_20 degree
● Thrust Angle : 0~+_5 degree
● Rim diameter : 10 ~ 23 inch
● Ambient temperature : 0～50℃
● Relative humidity : ≤85%
● Light condition : No direct Infrared light to the targets
● Lift platform height difference : front/end height difference < 2mm

Caution：We preserve the right to change design without prior notification.The measure range can only be assure when operate the wheel aligner according to this user manual.

Package includes：

1 * Monitor

4 * Wheel clamp hangers

1 * Steering wheel holder

1 * Brake pedal depressor

4 * Clamps

2 * Mechanical turntables

1 * Keyboard with a mouse

1 * Computer host with audio

4 * Targets

1 * Column assembly

1 * Cabinet

1 * Lateral beam assembly with two cameras

1 * User manual