obdlaunch
Autel IM608 MaxiIM 608 OBD2 Scanner OBDII Car Auto Diagnostic Tool OBD 2 All System Key Programming PK IM508 Key Programmer
Autel IM608 MaxiIM 608 OBD2 Scanner OBDII Car Auto Diagnostic Tool OBD 2 All System Key Programming PK IM508 Key Programmer
Couldn't load pickup availability
Autel MaxiIM IM608 Highlights:
1. Multi-Language:
Diagnose Software: English, French, German, Italian, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian
IMMO Software: English Only
2. Global Version: NO IP Blocking Problem,Can Be Used Worldwide
3. One Year Free Update Online (After One Year, Update Cost 1000USD/ Year)
4. All-IN-ONE: Powerful Combination of Advanced Key Programming/ All System Diagnostics (Same as as MaxiSYS Pro)/ Advanced Maintenance Services
5. Professional Key Programming Equipped with XP400 and MaxiFlash JVCI for ECU Programming
6. Pass-Through System, In-depth diagnosis of all vehicle modules and Programming of modules and components of the vehicle.
7. Wide Vechicle Coverage: Support more than 80 US, Asian and European makes and models,support Australia for Ford and for Holden
8. Powerful Hardware: Cortex A7+A15 six-core processor,10.1-inch LED capacitive touch screen with 1920x1200 Android Tablet
Autel MaxiIM IM608 is a state of the art 10-inch Android-based touchscreen tablet combining the most advanced key programming and immobilizer capabilities with OE-level diagnostics and service functions. Equipped with XP400 key programmer and MaxiFlash JVC_I ECU programmer, IM608 is a comprehensive immobilizer and key programming tool and ideal for auto technicians and locksmiths.
Languages
English, Spanish, French, German, Polish, Italian, Japanese, Korean, Dutch, Portuguese,Swedish, Russia
Update & Warranty
1 Year Free Update & 12 months for any quality problems
Key programming
If you lost all keys , you can also use IM608 to program a new key.
ADVANCED IMMO & KEY PROGRAMMING
■ ADVANCED IMMO & KEY PROGRAMMING
Smart Mode: for Guided and Automated Key Learning
Expert Mode: for Advanced Key Learning
·Read PIN/CS(All Key Lost)
·IMIMO ECU Refresh/Coding
·Generate Key
·for BENZ 3rd Generation IMMO Add Key, All key Lost, Key Learning
·Key Learning
·for BMW FEM/BDC Key Learning and ECU Adaptation
·Remote Learning
·for BMW CAS4/3/2 Key Learning
·Backup/Restore IMMO Data
·for VW/AUDI MQB Key Learning,48 Transponder (96-bit) Add Key. All Key Lost, A6 All Key Lost, and More
·IMMO ECU Reset/Adaptation
XP400 SWITCH & CHIP PROGRAMMER
·PC Supported
·MCU / EEPROM Chip Read / Write
·ECU Read / Write
·MC9S12 Encrypted Chip Read / Write
·Key Reading / Writing
·Mercedes Infrared Key Reading / Writing
·Finding the Control Frequency
·IC Card Reading / Writing
ECU Coding
The Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.
Active Test
The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or reinitialization, thus saving diagnostic time.
Eg: You connect a fuel pressure gauge, cycled the key and cranked the engine but you couldn’t figure out anything regarding the fuel pressure. With the actuation test function of this diagnostic tool, you can send a fuel pump command on instruction and see the proper fuel pressure, figuring out if there is a problem with the fuel pump circuit or pump.
Full Systems Diagnose (Faster and more effective than OE-level coverage diagnostic equipment）
As a distinguished diagnostic tool with comprehensive diagnostic functions, this MK908P offers users the ability of reading/clearing DTCs, viewing live data stream for all systems.
1.Retrieve and display ECU information of tested control unit, including unit type, version numbers and other specifications;
2.Read all kinds of DTCs from the vehicle’s control systems to locate problem areas and offer possible solutions;
3.Erase the codes easily after DTCs retrieval and certain repairs have been carried out;
4.Live data for each parameter item displayed in analog, text, waveform graph, digital, or full-screen display modes;
More than 30 Service Functions
The diagnostic tool is specially designed with the Service section to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. It provides component adaptation or variant coding functions for custom configurations, and also allows you to reprogram adaptive values for certain components after making repairs.
Oil Reset Service
Allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depend on the vehicle driving conditions and climate.
EPB Service
Helps maintain the electronic braking system safely and effectively, deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.
SAS Service
Allows you to perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM.
DPF Service
Allows you to carry out numerous functions to the Diesel Particulate Filter system.
TPMS Service
Allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.
IMMO Service
Programs a new anti-theft key, and performs key matching when the ignition switch, the combined instrument panel, ECU, BCM, or the remote control battery is replaced
BMS Service
Perform a reset on the vehicle battery for clearing the fault information and re-match the battery;
ABS Reset
Perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS), and turn off the warning light;
Tooth Learning
To make new crankshaft be used and IMMO (Anti-theft matching) to finish keys coding;
Injector Coding
Write the new code to the ECU after replacement of injector, so that the injector works;
Throttle Matching
Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately;
Transmission Adaption / Headlamp / Suspension / CHG tire size / TEC learn / Cylinder / Trans adaption
Airbag Reset / WIN DR ROOF / Seats / Odometer / Lang change
And many more...
Wide Compatibility and Vehicle Coverage
For Audi: A1, A3, A4, A5, A6, RS4, B6, B7, RS5, RS6, A4 Allroad, A8, S8, Q3, RSQ3, Q5, Q7, R8, TT
For Seat: Alhambra, Altea, Altea, Cordoba, CupraLeon, Exeo, Ibiza, Leon, Mii, Toledo
For Skoda: Citigo, Fabia India, Fabia, Kamiq, Karoq, Octavia, Rapid India, Rapid, Roomster, Superb, Yeti
For VW: Amarok, Arteon, Atlas, Beetle, Bora, BoraGli, Caddy, Crafter, EOS, Fox Africa, Fox EU, Fox, GTI, Gol County, Gol(5U), Gol(5W), Golf PLUS, Golf/Rabbit(1K), Golf6 ESTATE, Jetta, Parati, Passat, Phaeton, Polo, Scirocco, Sharan, Suran, T-Roc, Tiguan, Touareg, Touran, Transporter5/Multivan, up, UP!/cross UP!
For Fiat: 500, 500L, 500X prox, Albea, Boxer, Daily, Doblo, Doblo New, Ducato, Egea, Fiorino, Freemont, Idea, Grande punto, Jumper, Linea, Marea, Nemo, Ottimo, Palio, Palio RST, Panda, Perla, Promaster, Punto, Sinea, Stilo, Viaggio
And many more, you can check with our official website for car list.
Specifications:
·Operation System: Android 4.4.2,KitKat
·Processor: Samsung Exynos hex-core Processor(1.3GHz Quad-core ARM Cortex-A7+1.7GHz Dual-core ARM Cortex-A15)
·Memory: 2GB RAM & 64 GB On-board Memory
·Display: 10.1-inch LED capacitive touch screen with 1920*1200 resolution; Wi-Fi：(802.11 a/b/g/n/ac); USB 2.0
·Connectivity: BT v.2.1+EDR; SD Card (Support up to 32GB); HDMI
·Camera(rear): 8.0 Megapixel, AF with Flashlight
·Sensors: Gravity Accelerometer, Ambient Light Sensor (ALS)
·Audio: Microphone; Dual Speakers
·Input/output: 3-Band 3.5mm stereo / standard headset jack
·Power and Battery: Charging via 12V AC/DC power supply with the temperature between 0℃ to 45℃
·Input Voltage: 12V (9-24V)
·Power Consumption: 6.5W
·Operating Temp: 0℃ to 50℃ (32 to 122℉)
·Storage Temp: -20℃ to 60℃ (-4 to 140℉)
·Dimensions(W*H*D): 300mm (11.81") x 220.0mm (8.66") x 50.0mm (1.97")
·Weight NW: 1.42kg (3.13lb.)
·GW: 8.655kg(19.08lb)
·Protocols: ISO9141-2, ISO14230-2, ISO15765-4, K/L-line, Flashing code, SAE-J1850 VPW, SAE-J1850PWN, CAN ISO11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6SAE J1939, SAE J1708, Fault-Tolerant CAN
Autel MaxiIM IM608 Packling List:
1x Autel MaxiIM IM608 Main Unit
1x APC101 USB Cable
1x APA101 Signal Cable
1x MaxiFlash JVCI
1x APB101+APD101(EEPROM Adaptor+EEPROM Adapter Shell)
1x APA103(EEPROM Clamp)
1x XP400
1x APB102 MB IR Cable
1x APA104 ECU Clamp
1x Main Cable
1x APB104(MCU_FQFP64)
1x APA105(MCU Clamp)
1x USB Cable (2m)
1x APB105 MCU_FQFP80
1x APA106(MC9S12 Clamp)
1x Mini USB Cable
1x APB106(MCU_FQFP144)
1x APA107(Connect Cable)
1x AC/DC 12V Adapter
1x APB107(MCU_FQFP144)
1x Quick Reference Guide
2x Light Fuse 6*30mm
1x APB108(MCU_FQFP176)
1x Packing List
1x Cigarette Lighter
1x APA002(EEPROM Socket)
1x Carrying Case 634*170*404mm
1x AAC001
