AUTOOL BT210 Car Circuit Tester Power Probe Car Diagnostic Tool Electric Voltage Integrated Scanner 9-30V Car / Heavy Truck

AUTOOL BT210 Car Circuit Tester Power Probe Car Diagnostic Tool Electric Voltage Integrated Scanner for 12V Car 24V Heavy Truck

BT210 is a tool for maintenance and detection of automotive electricalcircuits. There are four detection modes (voltage test, continuity test, polarity test, temperature test) for switching.

AUTOOL BT210 Car Circuit Tester Feature:

1.Voltage Test : Used for voltage measurement of the circuit under test.

2.Continuity Test : Open- circuit, closed-circuit, virtual circuit and real circuit can be detected. If the indicator light is on, it means that the circuit under test is a closed-circuit or a real circuit. If the indicator light is off. it means that the circuit under test is a open-circuit or a virtual circuit.

3.Polarity Test : Test the circuit polarity, the green light represents the positive pole and the red light represents the negative pole. The green light represents the positive pole. The red light represents the negative pole.

4.Temperature Test : A temperature sensor is installed at the tip to detect the temperature of the designated contact.

5.APPLICABLE MODELS : Applicable to cars, trucks, motorcycles and other models.

6.LIGHT FUNCTION : After power-on, the light will be turned on by default. Press the"Lighting" key on the tool to turn on or off the light beside the probe.

7.OVERLOAD PROTECTION : It is applicable to 9-3OV DC, when the voltage or current is overloaded, it will start the overload protection to reduce losses. When the measured voltage is greater than 30V or the measured current is greater than 10A, The device will start the self-protection settings.

AUTOOL BT210 Car Circuit Tester Technical Parameters :

Test voltage range: 9-30V.

Overload protection current: 10A.

Line length: about 1.1m.

Packing List :